Installed Multiple Electric Roller Shutters at Rossan Point, London

  • Home
  • Case Studies
  • Installed Multiple Electric Roller Shutters at Rossan Point, London
Multiple Electric Roller Shutters with Centralised Control at Rossan Point, London E14

We installed multiple electric roller shutters at Rossan Point, 26 Quadrant Walk, London E14 9JW.

The ground-floor frontage follows the curve of the building, with separate openings positioned around it. Our installation brought together individual shutter units fitted to those openings and a shared control arrangement for operating them.

These were two parts of the same job: fitting the shutters around the building’s layout and providing a practical way to manage the frontage.

Project Specification

Project detail Information
Project
Multi-roller shutter installation
Location
Rossan Point, 26 Quadrant Walk, London E14 9JW
Operation
Electrically operated
Control
Multiple shutters controlled from one switch or remote control
Layout
Multiple separate shutter openings around a curved ground-floor frontage
Visible finish
Dark grey

Fitting separate shutter units around the building

We installed the shutters across the individual ground-floor openings, following the changing direction of the frontage.

The arrangement uses separate curtains with guide rails running down their sides. Each curtain travels within its own guides, while the shutter housing sits above the opening. When raised, the curtain rolls into that upper housing.

This allows the installation to follow the building bay by bay. The frontage curves, but it is not covered by one continuous curtain bending around the elevation.

The main components were positioned around the openings:

  • Shutter curtains close the separate sections of frontage.
  • Side guides define each curtain’s vertical travel.
  • Upper housings accommodate the rolled curtains beneath the glazing above.

The existing columns remain visible between the main sections of the installation. The dark grey shutters continue around the ground floor, giving the separate units a consistent appearance when closed.

Bringing the operation together through shared controls

We provided an arrangement that allows multiple shutters to be operated from one switch or remote control.

The shutters remain separate physical units, but their operation can be managed from a common control point. For someone responsible for the frontage, this removes the need to move between a different control location for every shutter.

That distinction is important on a multi-opening installation. The number and position of the shutters determine how they fit the building; the control arrangement determines how the operator manages them.

At Rossan Point, the completed work combines those individual shutter positions with shared operation. It is an example of why the controls need to be considered alongside the shutters, rather than treating them as an unrelated choice.

Tell us how your openings need to operate

For another property, the useful starting point is how the openings will be used. When discussing a multi-shutter installation, tell us:

  • Which openings need to be managed together.
  • Whether any areas need access while other sections remain closed.
  • Where the person operating the shutters needs to control them from.

Our roller shutter installation service covers the wider choice of shutter types, electric operation and controls.

To discuss a frontage with several openings, contact Redwood Shopfront with the property address and photographs showing the different sections. For a curved frontage, views from more than one angle will help us understand the layout.

Call 07380 111166 to discuss the proposed work.

Comments are closed